QR code design that still scans

A QR code can carry your colors, your logo and a friendly frame without becoming unreadable, as long as you respect what scanners need. Here is what you can change freely, what you should change carefully and how to test the result before printing.

By the QRmora team at LoboGeek · Updated October 19, 2026

How a phone sees your design

Before decoding anything, a scanner turns the camera image into something close to black and white. It looks for the three large squares in the corners, works out the grid from them and then decides, for every small square (module), whether it is dark or light. Your brand colors, gradients and rounded shapes are only a problem when they make that decision hard.

That gives a simple rule for any design choice: the scanner must still be able to tell dark modules from light ones, find the three corner squares and see where the code ends. Everything else is decoration. The sections below go through each element with that rule in mind.

Contrast and dark on light

Contrast is the most important design decision, more than the shape of the modules or the logo. What matters is the difference in lightness between the code color and the background, not how different the hues look. Navy, dark green, burgundy, dark purple and dark gray all work well on white or cream. Yellow, light pink, sky blue, gold and pastel colors do not, even when they look vivid on screen.

A practical check: imagine the design printed on a black-and-white photocopier. If the code would still look clearly dark on a light background, it will scan. QRmora measures the contrast ratio between the code and background colors and warns you when it drops below 4:1, a safe floor for print. With a gradient, the lightest color in the gradient is the one that counts, so a gradient from navy to light blue is only as good as the light blue end.

Remember that printing tends to lower contrast. Ink spreads on uncoated paper, colors print a little lighter or darker than on screen, and ambient light washes out the page. Leave some margin instead of designing right at the limit.

Inverted codes and backgrounds

An inverted code has light modules on a dark background, like a white code on a black poster. The QR code standard allows decoders to support this, and the camera apps on many recent phones read inverted codes, but plenty of scanner apps, payment terminals and older phones do not. If you cannot predict which device will scan your code, keep it dark on light. QRmora shows a warning when the code color is lighter than the background.

If your design is dark, you do not need to invert the code: place a regular dark code on a light panel or card inside the dark design. A frame does the same job and gives you room for a call to action.

Be careful with transparent backgrounds. A PNG with a transparent background looks fine on a white page, but if someone later places it on a dark photo or a colored slide, the code becomes inverted or low-contrast without anyone noticing. Busy photos behind the code have the same effect. A solid light background travels safely to any layout.

Module shapes and eyes

Square modules are the most robust, but scanners handle rounded modules, dots and diamonds well when the code is printed at a sensible size. These styles reduce the solid dark area of each module, so they lose a bit of tolerance to blur and distance; compensate by printing slightly larger. QRmora keeps the alignment patterns, the small squares that help correct distortion, solid even when you choose dots or diamonds.

The eyes are the three finder patterns in the corners. Scanners locate the code by looking for their characteristic proportions: a dark ring, a light ring and a dark center, in a ratio of 1:1:3:1:1 across the pattern. You can round the outer ring, make it a circle and change the shape of the center, but the rings must stay distinct and the overall proportion must survive. That is why QRmora offers square, rounded and circle shapes for the ring and the center, and no diamond center: a diamond breaks the proportion along the diagonals.

You can give the eyes their own color to match your brand. Keep that color dark enough to contrast with the background, just like the rest of the code.

Leave the quiet zone alone

The quiet zone is the empty margin around the code. The standard asks for four modules of light space on every side, so the scanner knows where the code starts and ends. Text, borders, photos or the edge of the page inside that margin are a common reason a well-designed code fails, especially when someone crops it tight in a layout program.

QRmora includes the full quiet zone in every download, and frames are drawn outside it. When you place the code in your own design, treat that white margin as part of the code: do not crop it, and do not let other elements overlap it.

Logos and error correction

QR codes include redundant data computed with Reed–Solomon error correction, so they can still be read when part of the pattern is damaged or covered. There are four levels: L recovers about 7 % of the data, M about 15 %, Q about 25 % and H about 30 %. A logo in the middle works because it covers modules that the error correction can rebuild.

That budget is shared with everything else that can go wrong: a scratch, a reflection, a fold, poor focus. A logo that uses up the entire 30 % leaves no margin for the real world. Keep the logo modest, keep it in the center and never place it over the eyes, the timing lines between them or the areas next to the eyes that hold format information.

When you add a logo, QRmora switches to level H automatically (codes without a logo use M, which keeps them less dense). It can clear only the modules under the logo's silhouette or a full box behind it, remove a white background around the logo, and it warns you when the logo covers a large part of the code. Higher error correction makes the code denser, so a code with a logo needs a little more print size than the same content without one.

Frames and calls to action

A frame is one of the most effective design elements, and it does not touch the code at all. A short text like "Scan to see the menu" or "Join our Wi-Fi" tells people what they will get, which makes them more willing to scan and helps them trust that the code belongs to you.

Keep the call to action short and specific: a verb and a benefit. QRmora includes frames for common cases (scan me, menu, Wi-Fi, reviews, contact, follow us, open link) and a custom text of up to 28 characters, with several frame shapes. Use the same frame and colors on all your materials so customers learn to recognize your codes, which also makes fake stickers easier to spot.

Next to the frame, consider printing the destination in readable text, such as your domain or the Wi-Fi network name. It serves people whose camera cannot scan and reassures the rest.

File formats: SVG for print, PNG for screens

SVG is a vector format: the code is stored as shapes, not pixels, so it stays perfectly sharp at any size. Send SVG to print shops and use it for signs, packaging, banners and anything designed in tools like Illustrator, Figma, Canva or InDesign. Do not convert it to a low-resolution image along the way.

PNG is a pixel image, ideal for websites, presentations, documents and social media. QRmora exports PNG up to 2048 px, which prints sharp at 300 DPI up to about 17 cm (6.8 in) wide. Avoid JPG for QR codes: its compression creates soft, blotchy edges around the modules. QRmora also creates print-ready PDF templates (signs, cards, stickers, labels and business cards) at 300 DPI.

Whatever the format, never stretch the code in only one direction, and resize it from the corners with the proportions locked.

Testing checklist before you print

QRmora runs a scan check on every design before download: an independent reader tries to decode it, the design gets a rating of Excellent, Good or Risky, and you get a suggested minimum print size along with tips if something needs fixing. That catches most problems on screen, but nothing replaces a test of the printed piece.

1. Print one copy at the final size, on the final paper or material.

2. Scan it with at least one iPhone and one Android phone, using the built-in camera app.

3. Scan from the real distance and in the real light: under the restaurant's lamps, through the shop window, at arm's length from a poster.

4. Check that it opens the right destination, on mobile data and not only on your office Wi-Fi.

5. Try a slight angle and a quick scan, the way a hurried customer would. If it takes more than a moment, increase the size or the contrast, or simplify the style.

FAQ

Frequently asked questions

Quick answers about creating, customizing and using your QR codes.

Didn’t find what you were looking for?

Write to us
Can a QR code be any color?

Almost. The code needs to be clearly darker than its background, so dark colors on light backgrounds work and light colors do not. Hue matters much less than lightness.

Do rounded or dotted QR codes scan worse?

Slightly, because they have less solid dark area. At normal print sizes and with good contrast the difference is small; print them a bit larger to be safe.

How big can my logo be?

There is no single number, because it depends on the content and the style. Keep it in the center, well away from the corner squares, and follow the scan check: if QRmora warns that the logo is large, shrink it.

Can I put a photo behind a QR code?

It is risky. A busy background makes light modules uneven and confuses scanners. Place the code on a solid light panel over the photo instead.

Should every QR code have a frame?

It is not required, but a frame with a clear call to action helps on printed materials. For tight spaces, such as labels, a code without a frame plus a short line of text next to it works too.

More guides

LoboGeek · Web design

Your business deserves a website. From US$280

We design fast, modern websites that work on any phone and are ready to show up on Google. Made by the team behind QRmora.

  • Made-to-measure design
  • Mobile-first
  • Ready for Google
See website packages

Sponsored by LoboGeek, creator of QRmora.