QR code printing checklist

Most QR codes that fail in print were fine on screen. The problems come from files, inks, paper, finishes and links that nobody checked before the print run. Go through this checklist before you send anything to the printer.

By the QRmora team at LoboGeek · Updated October 19, 2026

Vector or raster: send the right file

A QR code is made of perfect squares, and it should reach the printer that way. SVG is a vector file: it describes the shapes mathematically, so it prints with sharp edges at any size, from a sticker to a banner. It is the file to send to print shops, designers and sign makers, and it opens in Illustrator, Inkscape, Affinity, CorelDRAW and Canva.

PNG is a raster image made of pixels. It is perfect for documents, presentations, websites and home printing, but it has a fixed resolution: enlarge it past that and the edges of the squares turn soft or blocky. QRmora exports PNG at 512, 1024 or 2048 px, and the 2048 px file prints sharp up to about 17 cm (6.8 in) wide at 300 DPI.

If the printer asks for a PDF, place the SVG in your design software and export a print PDF from there; the code stays vector inside it. Avoid JPG: its compression adds blurry artifacts around the edges of the squares, exactly where scanners look.

Resolution and scaling checks

When the code is placed in a layout, check three things. First, that it was scaled proportionally: a code stretched even slightly in one direction may still look fine to people, but its grid no longer matches what scanners expect. Second, that the printed width is at least the minimum QRmora showed for your design in the scan check. Third, if you used a PNG, that its effective resolution at the final size is still around 300 DPI.

The size itself depends on scanning distance; our QR code size guide covers it in detail, from business cards to banners. A practical rule for this checklist: measure the code on the final proof with a ruler, not on screen, because layouts are often resized at the last minute.

Color: CMYK, solid black and contrast

Screens show color in RGB and presses print in CMYK (cyan, magenta, yellow and black inks). QRmora exports colors as RGB values, and the print shop or your design software converts them. Bright blues, greens and purples often come out duller and lighter after conversion, so a code that had good contrast on screen can lose some of it on paper. If you use a brand color, ask for a printed proof or check the converted color before approving.

For black codes, ask for 100% black ink (K only). Rich black, a mix of black with cyan, magenta and yellow (for example 60/40/40/100), looks deeper in large areas, but on small squares any misalignment between the four plates leaves colored fringes that blur the edges. Single-ink black, or a single dark spot color, gives the cleanest result.

Keep the code dark on a light background. Light codes on dark backgrounds look elegant but many phone scanners do not read them, and QRmora warns you when a design is inverted or its contrast is too low.

Difficult materials: kraft, colored, transparent and metallic

Kraft and uncoated papers absorb ink. The dark squares spread slightly (printers call it dot gain) and the brown background lowers contrast. Print the code larger than usual, prefer square modules over dots or thin styles, and if you can, print a white box under the code so it sits on a light, even background.

Colored stock behaves the same way: the background color is part of the contrast. A dark code on pale yellow or light gray paper works; on red, navy or black paper, give the code its own white panel, including the quiet zone.

Transparent materials such as acrylic, glass and clear vinyl have no background at all, so the code takes the color of whatever is behind it. Ask for a white underlayer (white ink) behind the code, or use an opaque white label. For window decals applied on the inside of the glass to be read from outside, tell the printer, so the design is printed reversed for the inside face and the code still reads the right way from the street.

Metallic inks, foil, holographic films and mirror finishes reflect light into the camera and make the pattern disappear at some angles. Keep the code itself in regular ink, and use the special finish elsewhere in the design.

Quiet zone, bleed and trim

The quiet zone is the plain margin around the code, four modules wide according to the QR standard. Scanners use it to find where the code starts, so it must be empty and the same light color as the code’s background. QRmora’s downloads already include it; the usual mistake happens later, when a designer crops the margin to save space or places text, a border or a photo right against the code.

Keep the code inside the safe area of the piece, a few millimeters away from the trim line, so cutting tolerances never eat into the margin. Avoid folds, perforations, seams and the gutter of a magazine or brochure: a fold through the middle of a code is one of the most common reasons a printed code fails.

Finishes and shapes: gloss, lamination and curved surfaces

Glossy lamination, UV varnish and acrylic sign holders reflect overhead lights, and a bright spot over part of the code can stop a scan. Matte or soft-touch lamination, or matte paper, keeps the code readable under any lighting. If the piece must be glossy, test it under the real lights where it will hang.

Curved surfaces such as cups, bottles, cans and tubes bend the code away from the camera, so the outer columns appear compressed. Place the code on the flattest part of the object, keep it narrow relative to the diameter, and avoid wrapping it around an edge or a label seam. Then test it on a real sample, not on the flat proof.

Fabric and embroidery are the hardest cases: threads cannot reproduce small squares cleanly. If you need a code on clothing, use screen printing or heat transfer at a generous size, and keep the content short so the code has fewer, larger modules.

Stickers and signs that live outdoors

Sun, rain and cleaning products degrade printed codes. Use outdoor vinyl with UV-resistant inks and a matte protective laminate. Colors fade faster than black, so a black code on a white base is the most durable choice for codes that must last months in the sun.

Codes in public places can also be tampered with: someone may paste a sticker with a different code on top of yours to send people to a fake page. Check your codes from time to time, print your web address in text near the code so people can see where it should lead, and consider tamper-evident or hard-to-peel materials for parking meters, payment points and other sensitive spots.

Test print and proof the destination

1. Print one copy at the final size and at 100% scale (turn off "fit to page"), on the real material if possible.

2. Scan it with at least one iPhone and one Android phone, ideally including an older model, using the built-in camera apps.

3. Scan it in the real conditions: the distance, the angle, the lighting and, for signs, from behind the counter or across the room.

4. Open the link on mobile data, in a private window, without being signed in, and confirm the page loads quickly, uses https and looks right on a phone.

5. Check that the destination will last as long as the print: no temporary file-sharing links, no shorteners that may expire, no campaign page scheduled to be taken down. If the destination may change, use a dynamic QR code so you can update it without reprinting.

QRmora runs its own scan check before every download and rates the design, but a physical test is the only way to catch problems added after the file left your computer.

Printing many codes: batches and label sheets

For inventories, tables, rooms, assets or event badges, QRmora’s batch generator creates up to 500 codes at once from a list or a CSV file with a url (or text) column and an optional name column. You can download them as a ZIP of PNG or SVG files named after each row, or as a print-ready PDF sheet with cards, stickers or adhesive labels.

The label sheets follow standard Avery layouts: 5160 and 5163 on Letter paper, and L7160 and L7163 on A4. Print them at 100% scale, with "fit to page" turned off, and try one sheet on plain paper held against a label sheet before using the real labels.

With batches, test a sample rather than every code: scan the first, the last and a few from the middle, and check that each name matches its code. Keep the CSV as your master record, so you can reprint a single damaged label later with exactly the same content.

FAQ

Frequently asked questions

Quick answers about creating, customizing and using your QR codes.

Didn’t find what you were looking for?

Write to us
What should I tell the print shop about a QR code?

Send the SVG, ask them not to resize it unevenly or crop the white margin, request 100% black ink for black codes, and ask for a proof you can scan.

Can I print a QR code in color?

Yes, as long as the code stays clearly darker than its background after CMYK conversion. Dark brand colors work well; light or neon colors do not.

Do QR codes work on laminated menus and table tents?

Yes. Matte lamination is the safest; with glossy lamination, test the code under the lights of the room where it will be used.

Does the margin around the code have to be white?

It has to be plain and light, matching the code’s background. Cream or very light colors work; patterns, photos or textures in the margin do not.

Is it a problem if the print is slightly blurry?

Slightly soft edges usually still scan if the code is large enough, but blur shrinks the gap between squares. Print a little larger and use the SVG.

More guides

LoboGeek · Web design

Your business deserves a website. From US$280

We design fast, modern websites that work on any phone and are ready to show up on Google. Made by the team behind QRmora.

  • Made-to-measure design
  • Mobile-first
  • Ready for Google
See website packages

Sponsored by LoboGeek, creator of QRmora.